characteristic:

What are the characteristics of the materials used by the bus bar manufacturer?

The clamping ring is made of oil resistant rubber

The clamping ring is specially designed with strong tension and no damage to the cable. It is not necessary to disassemble the fixing head, and the cable can be directly threaded and tightened, saving time and convenient use: general mechanical control box, distribution cable, machine, electrical appliances and other cables are fixed.

Material: polyester fabric on the back of the hand, 5mm white striped conductive silk, surface resistance of 10 7, and antiskid of cotton wool cloth and PVC on the palm.

Design form and material of the array needle: plastic and copper are especially suitable for workbenches, purification workshops, air shower rooms and various equipment that need to remove static electricity quickly. The amount of ions produced by a piece of electrostatic removal net is equivalent to that produced by more than 20 ionic copper bars.

Material: SKH-51 ◇.

High temperature quenching: hardness HRC59 ° - 61 °.

Row needle, material: UL nylon 6/6, fire rating 94V-2.

Application:

What are the applications of needle and mother arrangement processing in THR technology?

In recent years, surface mount technology has developed rapidly and played a pivotal role in the electronic industry. In addition to the scale effect of fully automated production, SMT has the following technical advantages: components can be mounted on both sides of PCB to achieve high-density assembly; Even the smallest components can achieve precision mounting.

Convenience of operation and mechanical strength of needle arrangement are also important factors. The connector is usually the communication interface between PCB main board and external components, so it may encounter considerable external force sometimes.

The components assembled by through-hole technology are much more reliable than the corresponding SMT components. No matter it is compact and easy to install, it is obviously different from the row needle of through-hole in size and assembly form.

For the processing of pin and bus arrangement used for field wiring in the industrial field, high-power components are usually subject to strong pulling, extrusion or thermal shock, which can withstand without being easily separated from PCB.

In some cases, these advantages are weakened with the reduction of component adhesion on PCB. SMT components are characterized by design. It can meet the needs of transmitting high voltage and large current. Therefore, sufficient electrical clearance and creepage distance must be taken into account during design, which will ultimately affect the size of components.